View CR2633C0G104M500B_4797964.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Radial & Axial
Radial & Axial
Features
This widely used ceramic capacitors includes both monolithic and multilayer types to provide a wide capacitance range of 1pF through 1 in respectly one standard size and shape(Radial & Axial).
Applications
The class1 temperature compensating(C0G) products can be used in circuits to stabilize frequency and temperature characteristics. The X7R, Z5U, Y5V dielectrics are optimum for by pass capacitors.
Shape and Dimensions
Bulk Type
CODE 051B 077B
L Max. 5.5 7.7
W Max. 5.5 7.6
T Max. 3.2
H Max. 6.4 9.2
P 0.7 5
d
Color Orange or Gold
Marking
0.5
Ex) 104
Flat Type
Multi Layer Ceramic Capacitors
Radial & Axial
Multi Layer Ceramic Capacitors
Code D( ) H H1 H2 L L1 P Dimensions 4 16 9 0 11 1.5 12.7 Tolerance 0.3 0.5 0.76, 0.5 2 Max. Max. 0.3 Code P1 P2 T W1 W2 S Dimensions 3.85 6.35 0.9 18 0 5 Tolerance 0.7 1.3 Max. 0.5 0.6 Max. 0.7 Code F G H J K N R =J =H 0.8 5 3.2 Dimensions 64.8 50.8~53.3 1.2 1.2 Max. 0.4 Min. Tolerance 0, 2
Code J K M Z
Tolerance 5.0 % 10 % 20 % 80, 20%
Remark C0G X7R, C0G Z5U, X7R Z5U, Y5V
No adhesive may be exposed
Code Volt
250 DC 25V
500 DC 50V
101 DC 100V
How to Order(Product Identification)
CA 2633 Y5V 104 Z 500 F
Code Packing
B Bulk
R Reel Pack
F Flat Pack
Reliability and Test Conditions
Characteristic
CR : Radial Lead Type CA : Axial Lead Type
The number shows the maximum length of "L" by 1/10 in millimeter, and the alphabet means lead difference.(Refer to above diagram)
No.
Item
Temperature Compensating Type C0G : 55 to 125
High Dielectric Constant Type X7R : 55 to 125 Y5V : 30 to 85 or 500 Z5U : 10 to 85
Test Methods and Conditions
1.
Operating Temperature Range Insulation Resistance Dielectric Strength
2.
More than 10,000
(whichever is smaller)
Applied the rated voltage for 2 minute - C0G : The rated voltage 300% - X7R, Z5U, Y5V : 250% Temperature Compensating Type
Temperature Characteristice C0G X7R Z5U Y5V
Temperature Range 55 to 125 55 to 125 10 to 85 30 to 85
Capacitance Change or Temperature Coefficient 0 30ppm/ 15% 22, 56% 22, 82%
3.
No detects or abnormalities
4. 5.
Capacitance Dissipation Factor
Within the specified tolerance 30 Min. : Q 1,000(DF 0.1%) 30 Max. : Q 400+20C (DF 1/(400+20C))
Char. 50V Min. X7R Z%V 2.5% 4.0% 9% (<220 ) 12.5% ( 220 ) 25V 3% 16V 3.5% 10V 5.0%
Cap. C0G (C 1000pF)
Testing Frequency 1 0.1 1 0.1
Testing Voltage 0.5 to 5V rms 1 0.2V rms
First two digits are significant ; third digit denotes number of zeros. Ex.) 101 = 100 1R5 = 1.5 103 = 10,000
5% (<220 ) Y5V 7% ( 220 )
7%
12.5%
C0G (C 1000pF) X7R, Z5U, Y5V (C 10 10V Min.)
1 0.1
1 0.2V rms
6.
Terminal Strength
No evidence of damage to body of device of looseness of terminals.
A static load of 10N(1kgf) : applied to one terminal in the axial direction and acting in a direction away from the body for 1 to 5 secs.
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
Radial & Axial
Multi Layer Ceramic Capacitors
Characteristic No. Item Temperature Compensating Type No marked defect Within 2.5% or 0.25pF X7R : (whichever is larger) Z5U, Y5V : 30 Min. : Q 1,000 (DF 0.1%) 30 Max. : Q 400 20C (DF 1/(400 20C))
Char. 50V Min. X7R Z5U 2.5% 4.0% 9% (<220 ) 7% 12.5% ( 220 )
High Dielectric Constant Type
Test Methods and Conditions - Soldering Temp : 260 5 No. Item Temperature Compensating Type 30 Min. : Q 350 (DF 0.3%) 10 30 Q 275 5/2C (DF 1/(275 5/2C)) 10 Max. : Q 200 10C (DF 1/(200 10C)) I.R. 11
Step 1 2 3 4
Characteristic High Dielectric Constant Type
Char. 50V Min. X7R Z5U 5% 4.0% 10% (<1 ) 7% (1) 25V 5% 16V 5% 10V 5%
7.
Resistance Appearance to Capacitance Soldering Change Heat Dissipation Factor(or Q)
Test Methods and Conditions Take it out and set it for 24 2 hours (temperature compensatig) or 48 4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA.
7.5% 20%
25V 3% 16V 3.5% 10V 5.0%
- Immersion Time : 5 0.5sec - Take it out and set it for 24 2 hours(temperature compensating type)or 48 4hours(high dielectric constant type) then measure.
10
Dissipation High Temperature Factor(or Q) Load
5% (<220 ) Y5V 7% ( 220 )
Y5V
7.5%
12.5%
15%
12.5%
More than 1000
or 50
(Whichever is smaller)
Char. X7R Z5U Temp. Range 55 to 125 10 to 85 30 to 85 Reference Temp. Cap. Change Within 15% Within 22% 56% Within 22% 82%
I.R. 8. Temperature Appearance Cycle Capacitance Change Dissipation Factor(or Q)
More than 10,000 No marking defects
or 500
(whichever & smaller)
Within 2.5% or 0.25pF X7R : Within + 7.5% Z5U, Y5V : Within 20% 30 Min. : Q 1,000 (DF 0.1%) 30 Max. : Q 400 20C (DF 1/(400 20C))
Char. 50V Min. X7R Z5U 2.5% 4.0% 9% (<220 ) 7% 12.5% ( 220 ) 25V 3% 16V 3.5% 10V 5.0%
Capacitance Capacitance Temperature Change Characteristics
Min. Max. Temp. Operating Room Operating Room () Temp. Temp. emp. Temp. 0, 3 3, 0 Time (min) 30 3 2 to 3 30 3 2 to 3
25
Y5V
5% (<220 ) Y5V 7% ( 220 )
12.5%
Take it out and set it for 24 2 hours [tempeature compensating or 48 4 hours(high dielectric Type) at room temperature, than measure. Temperature Coefficient - Temperature : 40 2
Char. Temp. Range Temperature Coefficient
(1) Temperature Compensating Type : The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5. (SL: +25 to 85 ) the capacitance shall be with in the specified tolerance for the temperature coefficient. The capacitance drift is calculated dividing the difference between the maximum measured values in the step 1, 3 and 5 by Cap, value in step 3.
Step Temperature
1 2 3 4 5
25 2 -55 3 25 2 125 3(for C0G) 25 2
I.R. 9. Humidity Load Appearance Capacitance Change
More than 10,000 No marking defects
or 500
(Whichever is smaller)
C0G
55 to 125
30ppm/
Within 7.5% or 0.75 (whichever is larger)
X7R : Within 12.5% Z5U : Within 30% Y5V : Within 30%, 40% (Y5V/1.0 F, 2.2 F, 4.7 F/10V) Within 30% (others)
Char. 50V Min. X7R Z5U 5% 4.0% 10% (<1 ) 7.5% 12.5% (1) 25V 5% 16V 5% 10V 5%
- Humidity : 90~95%RH - Hour : 500 12hrs - Test Voltage : Tge rated voltage - Take it out and set it for 24 2 hours (temperature compensatig) or 48 4 hours(high dielectric constant type) at room temperature, then measure. The charge/discharge current is less than 50mA.
Dissipation Factor(or Q)
30 Min. : Q 200 (DF 0.5%) 30 Max. : Q 100 10/3C (DF 1/(100 10/3C))
(2) High Dielectric Constant Type : The ranges of capacitance change compared with the 25 value over the temperature range shown in the table shall be in the specified range. 12 The regulation of environmental pollution materials 13 The regulation about destructive materials of the ozone layer Never use materials mentioned below in leaded MLCC products regulated this document. Pb, Cd, Hg, Cr+6, PBB(polybromida biphenyl), PBDE(polybrominated diphenyl ethers), asbestos.
Y5V
12.5%
15%
Never use the ODS(ozone depleting substance) materials below in leaded MLCC products regulated this document.
I.R. 10. High Appearance Temperature Capacitance Load change
More than 500 No marked defect
or 25
(whichever is smaller) - Testing Time : 1000 12hrs X7R : Within 12.5% , Z5U : Within 30% Y5V : Within 30%(Cap. < 1.0 F) Within +30% , 40%(Cap. 1.0 F) - Applied Voltage : Rated Voltage 200% - Temperature : C0G, X7R 125 3 Z5U, Y5V 85 3
Within 3% or 0.3 (whichever is larger)
Packing Quantity
Radial Type Inner Box 2,500 Outer Box 15,000 Remark Packing set on the basis of flat tapping Inner Box 5,000 Outer Box 50,000 Axial Type Remark
Unit : pcs
Packing set on the basis of flat tapping
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
Multi Layer Ceramic Capacitors
Capacitance Range
Type Char. Cap(pF) Volt
1 2 3 4 5 6 7 8 9 10 12 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 120 150 180 220 270 330 390 470 560 680 820 1.000 1.200 1.500 1.800 2.200 2.700 3.300 3.900 4.700 5.600 6.800 8.200 10.000 15.000 22.000 33.000 47.000 68.000 100.000 150.000 220.000 330.000 470.000 680.000 1.000.000
C0G 50 100
Radial X7R 50 100
Z5U 50
Y5V 16 50
C0G 50
Axial X7R Z5U 50 50
Y5V 50
SAMWHA CAPACITOR Co., Ltd.

▲Up To Search▲

Price & Availability of CR2633C0G104M500B

	To Download CR2633C0G104M500B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .